最近我得到一支浮漂,其结构是:木质纺锤型浮力泡,中间穿一根20.5毫米长的有机玻璃杆。浮力泡的最大直径是6.25毫米,漂杆的直径是1.7～1.5毫米(漂头～漂尾)。在漂尾顶端贯穿了一根长25毫米,直径为2.5毫米的红色塑料套管。漂头用胶及软线连接一根长20毫米,直径为3毫米的插杆。浮力泡固定在漂杆的2/5处。全漂的重心在浮力泡的最大直径处。从外观看,是一支小巧玲珑的浮漂,灵敏性会很不错。于是笔者配好钩、坠去池塘垂钓,在使用中发现:灵敏性很低,看不到漂 I recently got a float, the structure is: wood spindle buoyancy bubble, the middle wear a 20.5 mm long plexiglass rod. Buoyant bubble maximum diameter is 6.25 mm, drift rod diameter is 1.7 ~ 1.5 mm (drift ~ drift tail). A 25 mm long, 2.5 mm diameter red plastic sleeve runs through the tail of the drift tail. The head of the glue and a cord connected to a 20 mm long, 3 mm diameter rod. Buoyancy bubble fixed at 2/5 of the drift rod. The full floating center of gravity at the maximum diameter of the buoyancy bubble. From the exterior view, is a small and exquisite float, the sensitivity will be very good. So I with a good hook, falling pond fishing, found in use: low sensitivity, can not see the drift