一、工程概况太钢1350高炉基础,座于407根予制方桩之上,桩对基础形成全约束。该基础底标高■-4.00m,预标高■3.00m,全高7m。基底平面几何形状基本呈正八边形,对应两边的距离为33.63m,每条边长为13.93m。砼总量5100m~3。其中(?)-0.5m以下部分为C20砼,数量为2900m~3。■-0.50m以上部分为C20砼,数量为2200m~3。基础侧壁、顶面及底面均配制有钢筋网。根据总网络计划的安排,基础砼施工正处于冬期。另外,设计要求,基础砼不允许 1. Project Overview TISCO’s 1350 blast furnace foundation is seated on 407 precast square piles, and the pile forms a complete constraint on the foundation. The base elevation is -4.00m, the pre-level elevation is 3.00m, and the total height is 7m. The base plane geometry is basically a regular octagon, with a distance of 33.63m for each side and 13.93m for each side. The total amount of 5100m~3. The (?)-0.5m part of the following is C20砼, the number is 2900m~3. ■ The part above -0.50m is C20砼 and the number is 2200m~3. Base bars, top surfaces and bottom surfaces are all equipped with reinforced mesh. According to the arrangement of the general network plan, the foundation construction is in winter. In addition, design requirements do not allow