As the exploration and exploitation of oil and gas proliferate throughout deepwater area,the requirements on the reliability of dynamic positioning system become increasingly stringent.The control objective ensuring safety operation at deep water will not be met by a single controller for dynamic positioning.In order to increase the availability and reliability of dynamic positioning control system,the triple redundancy hardware and software control architectures were designed and developed according to the safe specifications of DP-3 classification notation for dynamically positioned ships and rigs.The hardware redundant configuration takes the form of triple-redundant hot standby configuration including three identical operator stations and three real-time control computers which connect each other through dual networks.The function of motion control and redundancy management of control computers were implemented by software on the real-time operating system VxWorks.The software realization of task loose synchronization,majority voting and fault detection were presented in details.A hierarchical software architecture was planed during the development of software,consisting of application layer,real-time layer and physical layer.The behavior of the DP-3 dynamic positioning control system was modeled by a Markov model to analyze its reliability.The effects of variation in parameters on the reliability measures were investigated.The time domain dynamic simulation was carried out on a deepwater drilling rig to prove the feasibility of the proposed control architecture.