论文部分内容阅读
Phase Transition and Elastic Properties of NbN under Hydrostatic Pressure
【机 构】
:
Institute of Atomic and Molecular Physics, Sichuan University, Chengdu 610065, China;Reseach Center
【出 处】
:
武汉理工大学学报(材料科学版)(英文版)
【发表日期】
:
2014年1期
其他文献
Polyaniline (PANI) composite nanotubes (90-130 nm in diameter) containing titanium dioxide (TiO2) nanoparticles (about 10 nm in diameter) were synthesized through a self-assembly process in the presence of a-naphthalenesulfonic acid (a-NSA) as the dopant.
Effect of Sizing on the Interfacial Shear Strength of Carbon Fiber/Epoxy Resin Monofilament Composit
The single fiber fragmentation test (SFFT) was used to measure the interfacial shear strength (IFSS) of sized and unsized CF800/epoxy resin monofilament composite in order to evaluate the effect of sizing respectively. Besides, the interfacial reinforcing
GeS4 bulk glasses were prepared by the melt-quench technique and the samples were irradiated by 532-nm linearly polarized light. After the laser treatment, the photo-induced changes of the samples were investigated by UV-1601 spectrophotometer and optical
An effective and reproducible preparation of silica sol nanospheres via a modified sol-gel process has been described. Monodisperse and stable silica sol nanospheres with uniformsize were successfully obtained through the optimized synthesis in which the
The Adsorbing Effect of Calcined Layered Double Hydroxide for Chloride Ions in Simulated Concrete Po
Thermal Stability Improved by?-?Stacking Interactions:Synthesis, Crystal Structure and Thermal Decom
An energetic salt, sodium nitroformate (NaNF), was synthesized and characterized by elemental analysis, IR and UV spectra, and its crystal structure was first determined by single crystal X-ray diffraction. The structure exhibits two types ofπ-πstacking i
Microstructure, Densification, Microhardness and Antioxidant Properties of Ti2AlN/TiN FGM Fabricated
Ti2AlN/TiN functionally graded materials (FGM) were successfully fabricated by vacuum hot-pressing. Bulk density of the sintered samples was measured by Archimedes principle. The sample sintered at 1 300℃for 2 h has the maximum final density and lowest op
We researched the electric heating property from butyl rubber-loaded boron carbide composite. The effects of boron carbide content on bulk resistivity, voltage-current characteristic, thermal conductivity and thermal stability of boron carbide/butyl rubbe