论文部分内容阅读
A user-defined three-dimensional(3D)discrete element model was presented to predict the dynamic modulus and phase angle of asphalt concrete(AC).The 3D discrete element method(DEM)model of AC was constructed employing a user-defined computer program developed using the “Fish” language in PFC3D.Important microstructural features of AC were modeled,including aggregate gradation,air voids and mastic.The irregular shape of aggregate particle was modeled using a clump of spheres.The developed model was validated through comparing with experimental measurements and then used to simulate the cyclic uniaxial compression test,based on which the dynamic modulus and phase angle were calculated from the output stress-strain relationship.The effects of air void content,aggregate stiffness and volumetric fraction on AC modulus were further investigated.The experimental results show that the 3D DEM model is able to accurately predict both dynamic modulus and phase angle of AC across a range of temperature and loading frequencies.The user-defined 3D model also demonstrated significant improvement over the general existing two-dimensional models.
A user-defined three-dimensional (3D) discrete element model was presented to predict the dynamic modulus and phase angle of asphalt concrete (AC) .The 3D discrete element method (DEM) model of AC was constructed employing a user-defined computer program developed using the “Fish” language in PFC3D.Important microstructural features of AC were modeled, including aggregate gradation, air voids and mastic. irregular shapes of aggregate particle was modeled using a clump of spheres. developed model was validated through comparing with experimental measurements and then used to simulate the cyclic uniaxial compression test, based on which the dynamic modulus and phase angle were calculated from the output stress-strain relationship. effects of air void content, aggregate stiffness and volumetric fraction on AC modulus were further The experimental results show that the 3D DEM model is able to accurately predict both dynamic modulus and phase angle of AC across a range of tempe rature and loading frequencies. The user-defined 3D model also demonstrates significant improvement over the general existing two-dimensional models.