【摘 要】
:
The influence of temperature and time on Np(Ⅵ ) and Pu(Ⅵ ) percent in 1AF fluid had been studied, the constitute of 1AF fluid was followed as: c(HNO3)=2 mol/L
【出 处】
:
Annual Report of China Institute of Atomic Energy
论文部分内容阅读
The influence of temperature and time on Np(Ⅵ ) and Pu(Ⅵ ) percent in 1AF fluid had been studied, the constitute of 1AF fluid was followed as: c(HNO3)=2 mol/L, (U)=225 g/L, (Pu)=2.4 g/L, (Np)= 0.129 g/L, which was in accord with the pilot test
The influence of temperature and time on Np (VI) and Pu (VI) percent in 1AF fluid had been studied, the formation of 1AF fluid was followed as: c (HNO3) = 2 mol / L, L, (Pu) = 2.4 g / L, (Np) = 0.129 g / L, which was in accord with the pilot test
其他文献
According to the characteristic of low-energy transuranic element 239Pu in reprocessing plant site, an in vivo measurement experimental system with room tempera
In order to study the radiolysis effect of α particles to reagents and understand the chemical process in reprocessing process, we measured the α dose rate of
该文通过对工件原点的剖析,提出了一种在数控机床或加工中心上,通过人工快速、准确地找到工件原点的方法.
“金属腐蚀”是指金属受到周围介质的化学作用或电化学作用而引起的一种破坏现象.金属腐蚀所带来的损失是极其严重的.据统计,每年由于腐蚀而报废的金属设备和材料,约相当于金
[摘 要] 工程力学是偏向技术类的学科,也是一门非常重要的技术基础课。在工程力学的教学中,对于培养学生解决实际问题的能力以及提高学生的科研技术水平来说,实际教学这个环节具有非常重要的作用。当前工程力学的教学新理念就是要以学生为中心,强化工程意识,培养新兴技术人才。在此理念的指导下,根据中心的建设、发展的历程,简单地阐述了在工程力学课程中关于实践教学的建设。 [关 键 词] 应用型本科; 工程力学
随着我国建设市场的快速发展,招投标制、合同制的逐步推行,工程造价管理进一步改革,以及加入世界贸易组织与国际接轨等要求,现工程招投标已开始推广和采用量价分离的工程量清
The multi-energy electron LINAC was an experimental device developed for irradiation metrology, the vacuum system is a main part of the device to maintain a low
近日,西门子奥钢联冶金技术部从中国企业济南钢铁集团有限公司(济钢)获得了济南新建4.3m中厚板轧机的最终验收证书。该轧机的设计能力为年产180万t钢板。西门子负责该项目的
屋面防水不仅是建筑物必须具备的功能,而且涉及居民安居乐业和生产安全的敏感问题.由于屋面受温湿变化影响很大,大多采用变形能力较强的柔性卷材或涂层作防水层,但由于施工管
哈尔滨市某住宅区取暖锅炉房建在杂填土地基上,填土厚度为4?16m 不等,为了减少地基的不均匀沉降,建设单位决定用桩基础穿过杂填土层,桩尖进入好土层2m.由于技术人员对基础方