攀枝花选钛试验厂是为综合回收攀枝花共生矿中钛、钴、镍矿物而建设的,是攀枝花钒钛磁铁矿综合利用工程的重要组成部分。选钛试验厂于1978年7月破土兴建,1979年9月基本建成,随即开始负荷试车,进行生产调试。在长沙矿冶研究所、长沙黑色矿山设计院和攀枝花冶金矿山公司等单位共同努力下,先后经过五次生产调试,到1980年11月调试基本成功。1980年12月5～9日,在攀枝花矿山公司召开选钛试验厂调试总结会。参加会议的有国家科委二局、冶金部科技办、四川省冶金局、渡口市科委等22个单位135名代表。会议认为,螺旋选矿机和摇床作为粗选设备,YD-3型电选机作为精选设备的流程可以获得品位46～48%的钛精矿和含钴0.3%的硫钴精矿,产品质量指标稳定,可用于工业生产。硫化矿物的回收采用常规浮选法是有效的。会议认为,主体设备如FLX-1型φ600×360螺旋选矿机、YD-3型电选机等虽是非定型产品,但 Panzhihua Titanium Selection Plant is a comprehensive recovery of Panzhihua symbiotic mine in the titanium, cobalt and nickel minerals and construction, is the Panzhihua vanadium-titanium magnetite comprehensive utilization of an important part of the project. Titanium test plant was built in July 1978 ground-breaking, basically completed in September 1979, then began to test the load, the production commissioning. Under the concerted efforts of Changsha Mining and Metallurgy Research Institute, Changsha Black Mining Design Institute and Panzhihua Metallurgical Mining Company, it has undergone five production and debugging sessions in succession and was basically successful in commissioning in November 1980. 1980 December 5 ~ 9, held in Panzhihua mining company selected titanium test plant commissioning summary. There were 135 representatives from 22 units including State Science and Technology Commission, Science and Technology Office of Ministry of Metallurgical Affairs, Sichuan Metallurgical Bureau, and Dukou Science and Technology Commission. The meeting held that the spiral concentrator and shaker as a roughing equipment, YD-3 electric separator as a selected equipment process can obtain grade 46 ~ 48% of the titanium concentrate and 0.3% of the cobalt-cobalt concentrate, the product Stable quality indicators, can be used for industrial production. Recovery of sulphide minerals using conventional flotation method is effective. The meeting held that the main equipment such as FLX-1 type φ600 × 360 spiral concentrator, YD-3 type electric machine, etc. are non-stereotyped products, but