论文部分内容阅读
本文试图借助于计算机选取最佳的核动力装置设计参数,在各项设备计算中分别给出装置设计变量与尺寸或重量的关系,从而得出最佳的方案,即设计计算出的装置重量最轻,尺寸最小。本文所确定的装置设计变量为:回路载热剂压力 P_1;进出蒸发器的温度差Δt_1;回路工质压力 P_2;冷凝器工作压力 P_3。
This paper attempts to select the best design parameters of nuclear power plant with the help of computer and gives the relationship between device design variables and size or weight respectively in the calculation of each device so that the best solution is to design the calculated device weight Light, smallest size. The device design variables identified in this paper are: the loop heat carrier pressure P_1; the temperature difference Δt_1 into and out of the evaporator; the circuit breaker pressure P_2; the condenser working pressure P_3.