1 概述我矿选矿厂以往采用钢丝绳绞车牵引矿车进卸矿点人工卸矿,工人劳动强度大,故障多,而且每月需要更换一根80m长的钢丝绳。后来由人工倒矿改为翻罐倒矿;如果用绞车拉矿车进罐笼,既占地宽,挂钧不方便又使调车程序复杂。若采用电机车推车进罐笼,既要占用一台电机车,又要增加一个机车操作工。为了解决这个问题,我们自制了一台推车机,安装在翻罐一侧,代替绞车或电机车。经过多年的使用,效果很好。实践证明,这是配合翻罐卸矿的 1 Overview In the past, the ore dressing plant used the wire rope winch to drag and drop the dump truck into the unloading point for manual unloading. The workers were labor-intensive and had a lot of troubles. They also had to replace an 80-meter-long wire rope each month. Later by the manual inverted ore instead of inverted cans; if the winch pulled into the cage with a winch, covers an area wide, hanging Jun inconvenient and make shunting complicated procedures. If the electric cart into the cage, it is necessary to occupy an electric locomotive, but also to add a locomotive operator. In order to solve this problem, we made a self-made pusher machine, installed on the side of the canister, instead of a winch or an electric car. After years of use, the effect is very good. Practice has proved that this is with the tank dumping