Synthesis and Characterization of Lignin Grafting Modification-based Aliphatic Superplasticizer

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:china_jjf_wolf
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Lignin as the main component of black liquor is generally employed to modify aliphatic superplasticizer (AFS). However, the modification effect is hard to evaluate correctly due to the uncertain molecular structure of lignin and the disturbance from the complexity of black liquor compositions. In this paper, the purified lignin via acid precipitation from straw black liquor is used to modify AFS. The modified AFS named as LAFS for short presents lower molecular mass than AFS. It is assumed that it is due to the single active site of guaiacol segments in lignin by which lignin graft modifies AFS in virtue of methylolation reaction. In order to verify this assumption, guaiacol and dihydro eugenol as the typical segments of lignin macromolecule were selected, respectively, as the simplified model compounds of lignin to modify AFS, and corresponding products are abbreviated in GAFS and DAFS. Both GAFS and DAFS show the lower molecular mass than unmodified AFS. FTIR and TG-DTG analyses prove that lignin is successfully grafted onto AFS. The graft modification of lignin results in a decrease in electrostatic epulsion, but an enhanced steric hindrance. Therefore, although the replacement rate of lignin in LAFS was about 23.3%, the dispersion performance was only slightly affected.
其他文献
In order to fabricate a novel ZnO/cotton composite, a high proportion of ZnO nanoparticles were assembled in cotton fibers, and the as-obtained cotton fabric can possess better UV blocking property compared with common ZnO/cotton composite. Firstly, the c
The preparation of hydroxyl chromium oxide by hydrogen reduction of disodium chromate and particulate hydroxyl mechanical activation features were studied. Then with self-made hydroxyl chromium as the raw material, a direct reduction and carburization pro
Based on the ABAQUS / Explicit finite element method, the forming force changing trend of deep drawing test for 6A16 aluminum alloy plate after pre-aging and storage at room temperature for one month was simulated under friction coefficient ranging from 0
The interfacial transition zone (ITZ) between the aggregates and the bulk paste is the weakest zone of ordinary concrete, which largely determines its mechanical and transporting properties. However, a complete understanding and a quantitative modeling of
Powder quartz (PQ)/nano-TiO2 composite was prepared by a mechanochemical method. Based on as-prepared PQ/nano-TiO2 composite, we prepared interior paints and investigated the degradation efficiency of formaldehyde (DEF). Scanning electron microscopy showe
The effect of carbonation treatment and mixing method on the mechanical properties and interfacial transition zone (ITZ) properties of recycled aggregate concrete (RAC) was investigated. Properties of recycled concrete aggregate (RCA) were tested firstly.
The influence of polyepoxysuccinic acid(PESA)on the solid phase products in hydrated Portland cement pastes was investigated by isothermal calorimetry,X-ray diffraction(XRD),29 Si and 27 Al nuclear magnetic resonance(NMR).The results indicated that PESA b
Dynamic compression tests were carried out to investigate dynamic mechanical behavior and adiabatic shear bands in ultrafine grained (UFG) pure zirconium prepared by equal channel angular pressing (ECAP) and rotary swaying. The cylindrical specimens were
Mo fibers were added to RMC with different mass ratios of resin and hardener to improve its mechanical properties. The influences of fiber surface state and hardener content on interface bonding strength and mechanical properties of RMC were studied, resp
NbCrAl coatings in the presence or absence of Al outer layer were prepared on C103 Nb based alloy and alumina substrate by direct current magnetron sputtering technique. The oxidation performance of coating systems was evaluated by isothermal oxidation te