【摘 要】
：
The fly ash was added to melt to increase the melt viscosity. The main components are quartz and mullite in the fly ash,therefore its a kind of hardness ceramic
【机 构】
：
School of Materials and Metallurgy
论文部分内容阅读
The fly ash was added to melt to increase the melt viscosity. The main components are quartz and mullite in the fly ash,therefore its a kind of hardness ceramic particles. After grinding for 10 h, the spherical particles increase and new surface is produced which will improve their performance. The cell wall was observed by SEM, many fly ash particles are in the wall. These particles tend to increase the molten aluminum surface viscosity, postpone the exhaust course, sustain the liquid within the film and delay the onset of rupture. Finally, the aluminum foam with uniform cell structure can be obtained. The density is about 0.4 g/cm3,porosity is in the range of 85%-90% and the aperture is 4-7 mm.
其他文献
The thermal stability of Al3(Sc,Zr) precipitates in the cold worked Al-Mg-Sc-Zr alloy after elevated temperature exposure was investigated. The evaluation was c
In this paper, several widely applied fracture criteria were first numerically examined and the crack-tip-region Jintegral criterion was confirmed to be more ap
A laboratory-scale intermediate-temperature H2S fuel cell with a configuration of H2S, (metal sulfide-based composite anode)/Li2SO4+Al2O3/(NiO-based composite c
A series of Eu-doped ZnO films were prepared by a sol-gel method. Precursor and films were characterized by thermal analysis (TG-DTA), X-ray diffraction (XRD),
The oxidation of two two-phase ternary Fe-Cu-Al alloys containing about 5%(mole fraction) aluminium, one Fe-rich and one Cu-rich, has been studied at 900 ℃ in
Sn-Al-P-B composites were synthesized by novel rheological technique. The microstructure, morphology, and electrochemical performance of the materials were inve
Microarc oxidation(MAO) coatings were prepared on the surface of aluminum alloys with different contents of magnesium. The morphologies and surface roughness of
Key variable identification for classifications is related to many trouble-shooting problems in process industries. Recursive feature elimination based on suppo
Extrusion is the key technology to manufacture aluminum profiles and involves complicate metal deformation coupled with temperature changes. The choice of numer
The effect of evolution of polycrystalline texture on normal anisotropy coefficient r-value of aluminum alloy sheet was investigated. For this purpose, the text