论文部分内容阅读
Effect of Direct Quenching and Partitioning Treatment on Mechanical Properties of a Hot Rolled Strip
【机 构】
：
The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, China
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2016年1期
其他文献
Preparation and Characterization of Mg/Al/Fe Hydrotalcite with Superb Absorption Capacity toward Con
Mg/Al/Fe layered double hydroxide (MAF-LDH1) was prepared by solvothermal method with the sodium dodecyl sulfate as the template,and the ethanol system was benefit to growth of sample.The nature in the resulting MAF-LDH was investigated by X-ray diffracti
This work focuses on the dynamic rheological behavior of low water-to-binder ratio cement mortars blended with fly ash microspheres (FAM) or silica fume (SF). The initial slump flow of each group has been controlled at similar values by adjusting the supe
The deformation behavior and formability of gradient nano-grained (GNG) AISI 304 stainless steel in uniaxial and biaxial states were investigated by means of tensile test and small punch test (SPT). The GNG top layer was fabricated on coarse grains (CG) A
Si-Al-Y Co-deposition Coatings Prepared on Ti-Al Alloy for Enhanced High Temperature Oxidation Resis
Si-Al-Y co-deposition coatings were prepared on Ti-Al alloy by pack cementation processes at 1 050 ℃ for 4 h with different halide activators in the packs for enhancing the high temperature oxidation resistance of Ti-Al alloy. The structure, constituent p
Hydration Characteristics and Humidity Control Performance of Calcium Silicate Board Prepared from M
The feasibility of utilizing molybdenum tailing and diatomite as siliceous materials to prepare calcium silicate board was explored. The influences of molybdenum tailing/diatomite proportion on hydration characteristics, thermal conductivity, water absorp
Synthesis Mechanism and Material Characterization of C4AF Obtained by the Self-propagating Combustio
To investigate the influence of preparation process on the properties of synthesized C4AF,the powder was prepared via the self-propagating combustion reaction(SPCR)method using urea as fuel and metal nitrates as cation precursors.Synthesis mechanism of th
Comparative Study of Tensile and Charpy Impact Properties of X7O and X8O Linepipe Steels After Ultra
Ultra fast cooling (UFC) processing after hot deformation was conducted on X70 and X80 linepipe steels.Tensile and charpy impact properties of both steels have been investigated in this work.The results have shown that the mechanical properties satisfy al
Cu-Zr-Al- (Y, Ag) amorphous alloy ribbons of Cu50Zr42Al8, Cu46Zr47-xAl7Yx (x=2, 5), Cu43Zr42Al8Ag7, and Cu43Zr42Al8Ag5Y2 were prepared using the single roller melt-spinning method. The glass forming ability and non-isothermal crystallization behavior of t
Microstructure and Electrical Conductivity of CNTs/PMMA Nanocomposite Foams Foaming by Supercritical
The carbon nanotubes (CNTs)/ polymethylmethacrylate (PMMA) nanocomposite foams were prepared by the anti-solvent precipitation and supercritical foaming method. The morphology and the electrical conductivity of the foams with different kinds of CNTs were