【摘 要】
：
Silica aerogel materials are well recognized for their superinsulation performance and are regarded as one of the hot candidates to revolutionize building insulation. To date, high production cost related to exorbitant precursors as well as cumbrous multi
【机 构】
：
School of Environmental and Safety Engineering, Changzhou University, Changzhou 213164, China
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
Silica aerogel materials are well recognized for their superinsulation performance and are regarded as one of the hot candidates to revolutionize building insulation. To date, high production cost related to exorbitant precursors as well as cumbrous multi-step hydrophobization process has often narrowed the ifeld of applications. In this work, granular silica aerogel materials were synthesized by extracting SiO2from recycled rich silicon coal gangue, followed by one-step hydrophobization and ambient pressure drying. Lightweight (about 0.16 g/cm3) and nanostructural aerogels were obtained through this route. They exhibit a 3D open porous microstructure with around 600 cm2/g surface area and 20 nm of the average pore diameter, thermal conductivity of 4-5 mm packed granules is 20-25 mW/(m·K), which was proved by both guarded hot plate and hot-wire transient methods. This study offers a new facile route for the synthesis of silica aerogel from recycled solid waste coal gangue and suggests a method, which may lead to a cost reduction in terms of industrial production.
其他文献
Pouring temperature and time are the most important influencing factors on interfacial reaction during the centrifugal casting. When cast at high temperatures, the crucible becomes brittle and prone to cracking, and shows a low stability. In this paper, w
Low average temperature, large temperature difference and continual freeze-thaw (F-T) cycles have signiifcant impacts on mechanical property of asphalt pavement. F-T cycles test was applied to illustrate the mixtures’ compressive characteristics. Exponent
The microstructure and dynamic rheological characteristics of asphalt containing different polymer modifiers (crumb rubber, styrene-butadiene-styrene and crumb rubber mix with styrene-butadiene-styrene) at mid and high service temperature levels were inve
This work aimed to research the structure models of amorphous materials. Five amorphous and paracrystalline samples (natural or artiifcial) were investigated via29Si/27Al nuclear magnetic resonance (NMR) and field emission scanning electron microscopy/ene
Implant-related infection is one of the key concerns in clinical medicine, so the modification of titanium to inhibit bacterial adhesion and support osteoblast cell attachment is important. In this article, two strategies were used to examine the above ef
Here, a new idea was proposed for template-free synthesis of hierarchical m-ZrO2 nanorods and “their” possible formation mechanism based on a series of chemical reactions by simple hydrothermal method. The traditional preparation methods of hierarchical Z
To obtain safety working before long-term early warning, we proposed a process for the preparation of luminescent films on metal substrate to detect the wear life. ZnO films were prepared on aluminum (Al) foils by the magnetron sputtering technique. The m
This work aimed to develop an intelligent multi-target tracking hyaluronic acid-RGD-chlorambucil-quantum dots (HA-RGD-CLB-QDs) drug delivery system. After deacetylated, hyaluronic acid was reacted with anticancer drug chlorambucil, RGD, and quantum dots t