Two thixoforming technologies of 6066 aluminum alloy (Al-1.37Si-1.37Mg-0.77Cu-0.07Mn) produced by multi-layer spray deposition process were studied. The spray-f
A jet type erosion-corrosion tester was developed for the erosion-corrosion investigation of high-chromium cast irons. During tests the size and the shape of pa
The air oxidation of Cu-Ni alloys with 50% and 70% nickel (mole fraction) at 800℃ was studied. The kinetic curves for the oxidation of the two alloys are compl
CuCr25W1Ni2 alloy was prepared by means of vacuum induction melting (VIM). A series of Cu/Cr alloys with different compositions (mass fraction, 25%~75%) and Cr g