自动拨料装置是利用冲压机冲头的上下运动,通过一个圆筒上的螺旋槽与一端固定在冲头上另一端在圆筒螺旋槽内滑动的拨杆,实现自动拨料。冲头上升,工件掉下之前拨杆上的接料板向前运动,进入上下模之间,转子冲片即掉在接料板上。当冲头向下运动时,接料板向后运动,退出模外。由于接料板带有倾斜度,以及向后运动的惯性,把转子冲片抛出板外,掉入桶内。本装置于一九七三完成。原来的转子冲槽是由两人操作,要一人冲,一人拨料。采用该 Automatic feeding device is the use of punching machine punch up and down movement through a spiral groove on the cylinder and one end fixed to the punch on the other end of the sliding groove in the cylinder spiral lever to achieve automatic dial material. Punch up, before the workpiece fell on the lever on the plate forward movement, into the upper and lower mold, rotor blanks that fell on the receiving plate. When the punch moves downward, the splicing plate moves backward and exits the die. Due to the inclination of the splicing plate, as well as the inertia of the backward movement, the rotor punched out of the plate, fall into the barrel. The device was completed in 1973. The original rotor slot is operated by two people, to one person red, one person dial material. Use that