【摘 要】
:
The thermal decomposition of potassium titanium hexacyanoferrate(Ⅱ) (KTiFC) loaded with cesium (referred to as Used Exchanget,or UE) was studied at different f
【机 构】
:
Institute of Nuclear and New Energy Technology
论文部分内容阅读
The thermal decomposition of potassium titanium hexacyanoferrate(Ⅱ) (KTiFC) loaded with cesium (referred to as Used Exchanget,or UE) was studied at different flow rate of air in a fixed bed calciner.The calcination process consisted of four stages:ambient temperature-180℃ (stage Ⅰ),180-250℃ (stage Ⅱ),250-400℃ (stage Ⅲ),and constant 400℃ (stage Ⅳ).The most intense reaction occurred in stage Ⅱ.The rate of thermal decomposition was controlled,depending on the O2 flux,by O2 or CN concentration in different stages.Results from differential thermal analysis (DTA) showed that the calcination reaction of the anhydrous UE was exotlaemic, with an approximate heat output of 4.6kJ·g-1,which was so large to cause the possible agglomeration of calcined residues.The agglomeration could be avoided by enhancing heat transfer and controlling the O2 flux.It was found that there was no cyanides in the calcined residues and no CN-bearing gases such as HCN and (CN)2 in the off-gas.It seemed that the catalytic oxidation furnace behind the fixed bed calciner could be cancelled.
其他文献
The effects of two-stage aging and retrogression and reaging heat treatment on the fracture toughness and stress corrosion cracking resistance of 7475 alloy wer
The microstructure and wear behaviour of the thermite reaction coating produced by the hybrid laser claddingremelting on AA7075 aluminum alloy for the systems o
走出国门获取资源类产品是保障国民经济发展的重要手段.浙江民营企业在"走出去"的实践中取得了相当的成绩,但也还存在不少问题.本文分析了"走出去"的多种形式,建议企业要充分
The properties and structure of electrodeposited RE (CeO2)-Ni-W-P-SiC composite coating were investigated. The results show that the hardness and electrodeposit
In order to improve the wear resistance of Ti-6Al-4V, different amounts of Si3N4 powder were added into the alloy powder and sintered at 1250℃. Porous titanium
NiOOH was prepared by one-step electrolysis of spherical Ni(OH)2 and the effects of electrolysis parameters were examined.The higly pure NiOOH was obtained afte
A first-principles plane-wave pseudopotential method based on the density functional theory was used to investigate the energetic and electronic structures of i
This paper presents the adaptive mesh finite element estimation method for analyzing 2D linear elastic fracture problems. The mesh is generated by the advancing
Employing carbonyl iron powder and Ethylene-Propylene-Diene Monomer (EPDM) as the absorbent and matrix, rubber radar absorbing materials (RAM) were prepared. Ef
(Nd0.01Y0.99)3Al5O12 nano-sized powders were synthesized by low temperature combustion (LCS), using Nd2O3, Y2O3, Al(NO3)3·9H2O, ammonia water and citric acid a