涂镀法的原理是电化学沉积过程,但它无需镀槽,有办公桌大小的场地即可,且无污染,沉积速度快,结合强度高,表面光洁度达镜面程度,硬度至HRC70,镀层最厚可达1.5mm。学员经一天培训即可操作。涂镀法的工艺过程如下: 1.准备工序:将被加工件固定在简易工装上并暴露出待加工表面,其它部位注意保护好,以免腐蚀。 The principle of the coating method is electrochemical deposition process, but it does not require plating tank, a desk-sized site can be, and no pollution, deposition speed, high bonding strength, surface finish up to the mirror level, the hardness to HRC70, coating the most Thick up to 1.5mm. Students can operate after a day of training. Coating process is as follows: 1 preparation process: the workpiece will be processed in simple fixture and exposed the surface to be processed, other parts of the attention of protection, to avoid corrosion.