论文部分内容阅读
我们洗输液瓶采用了负压冲瓶法(冲瓶装置见附图),旣简单方便,又节省劳力和提高了工作效率;冲力大,瓶子洗得干净,对提高产品的合格率起到了一定的作用。使用方法: 首先将导管19断开,装上3号垂熔漏斗,放入盛有蒸溜水的容器中;然后开启真空泵,关闭活塞17,打开活塞16,此时蒸溜水经3号垂熔漏斗沿导管20升入容器1,约15分钟即可抽满(瓶容量为4万毫升)。然后将活塞16关闭,
We wash the infusion bottle with a negative pressure bottle method (flushing device see photo), 旣 simple and convenient, but also save labor and improve work efficiency; large momentum, the bottle was washed clean, to improve the passing rate of products played a certain Role. Usage: First, the catheter 19 is disconnected, fitted with No. 3 vertical melting funnel, placed in a container filled with distilled water; and then turn on the vacuum pump, turn off the piston 17, open the piston 16, when distilled water through the No. 3 vertical funnel As the tube 20 advances into the vessel 1, it can be drawn in for about 15 minutes (bottle capacity 40,000 ml). Then the piston 16 is closed,