Linea公司在意大利建造的三坐标程控测量划线机可测量零件的五个表面(或在五个表面上划线),而不需要变动工件的位置。悬臂式测量头可随意移动,零件被测区域不受限制,而且大型零件装上卸下很方便。整个测量工作通过吊挂式按钮盘集中控制。操纵台面的显示屏可在三个方向用数字显示测量结果。通过手工方式可输入119项根据被测参数编制的检测程序,并且通过首件测量或划线可把测量头的位移过程贮入记忆系统,需要时可自动再现。该测量机还具有 Linea’s three-coordinate programmable measuring and marking machines built in Italy measure five surfaces of a part (or over five surfaces) without changing the position of the workpiece. Cantilever head can move freely, parts of the measured area is not limited, but also easy to install and remove large parts. The whole measurement work is controlled by the hanging button plate. The display on the console can digitally display the measurement results in all three directions. By hand, you can enter 119 test programs based on the parameters to be measured, and the displacement of the measuring head can be stored in the memory system with the first measurement or scribing. Automatic reproduction is possible if required. The measuring machine also has