检测器与限位开关、邻近探测器或光电开关一起可检测装配零件的有无和位置,以及其他机械特性。这些检测器通过与电接触的组合可诊断零件的状态。 日本自动装配机制造厂将上述检测装置应用于装配机械时,装配机本身可找出缺陷,并在装配过程中予以消除,区分出良与不良,因此并不需花费额外费用即可进行检测和质量管理。 The detector, together with the limit switch, proximity detector or photoelectric switch, can detect the presence or absence of an assembly part, as well as other mechanical characteristics. These detectors can diagnose the condition of a part by a combination of electrical contacts. When the Japanese automatic assembly machine manufacturing plant applies the above detection device to the assembly machine, the assembly machine itself can find out the defects and eliminate them in the assembly process to distinguish between good and bad, so that it can be tested without any additional cost Quality Control.