1启动(1)启动前准备。启动前应认真检查,确认发动机连接正常、油门操纵灵活,并按规定加足冷却液,检查机油是否在正常范围内、各部分接头是否旋紧及有无渗漏现象。将换挡操纵手柄、手制动手柄、五路阀操纵的发动机动力输出操纵手柄及茎秆还田机操纵手柄等均置于空挡位置,扳动熄火拉线,使喷油泵处于供油状态,最后将油门操纵手柄放在中间位置,插入钥匙点火启动。 1 Startup (1) Preparation before starting. Prior to start should be carefully checked to ensure that the engine is connected properly, throttle control flexible, and in accordance with the provisions of the additional coolant, check the oil is within the normal range, the various joints are tightened and whether leakage. Will shift the joystick, hand brake handle, five-way valve control engine power output control handle and stem straw machine manipulating handle and so on are placed in the neutral position, pull the fire line, so that the fuel injection pump is in the oil state, and finally Put the throttle control handle in the middle and insert the key to start the ignition.