我厂使用的J53—100吨压力机,原使用3号工业润滑脂,该脂易染灰尘、吸附力差,流失严重,丝杆、螺母得不到很好的润滑,磨损严重,屡有导轨、螺母拉毛、咬死事故的发生。为此,我们自配了专用润滑脂,解决了该机的润滑问题,收到了较好的效果。该脂的配比是:用含量99%的二硫化铝粉5%+2号主轴脂91%+68号机械油4%,配好后经充分调合均匀即可。 I used the factory J53-100 tons of press, the original use of industrial lubricants No. 3, the grease easily Dust, poor adsorption, loss of serious, screw, nut can not be very good lubrication, severe wear and tear, often rail , Nail hair, killed the accident occurred. To this end, we have a special grease, solve the lubrication of the aircraft, received a good result. The fat ratio is: content of 99% of the aluminum disulfide 5% +2 spindle oil 91% + 68% of the mechanical oil 4%, with a good mix can be fully adjusted.