吸管自动洗涤器的结构及使用见图1和图2所示。在图工中,“J”形细进水管及倒“U”形粗排水管由耐酸碱的硬质半透明塑料管或玻璃管制成。在排水管A的下部外侧壁钻一小孔,嵌入“J”形细进水管,嵌接处需作密封处理。洗涤筒的筒底放入密布孔眼的铝片垫。使用前,将浸泡消毒后的吸管整齐地斜置,其大孔向下,以便于管内进水及出水。 Straw automatic scrubber structure and use shown in Figure 1 and Figure 2. In the drawings, the “J” thin inlet and inverted “U” thick drain pipe is made of acid-base hard plastic tube or glass tube. A small hole is drilled in the lower outer wall of the drainage pipe A, and the “J” shaped thin water inlet pipe is inlaid, and the sealing place needs to be sealed. Drum tube into the bottom of the aluminum eye pad thick cloth pad. Before use, the soaked sterilized straw neatly inclined, the big hole down to facilitate the tube into the water and water.