四川省自贡市长征机床厂,针对飞机结构件的特点,在X52K立铣的基础上,变型设计并试制成功XF5032型三坐标液压仿形铣床。主要技术参数如下: 工作台面积 320×1250毫米仿形行程 700×280×300毫米仿形进给速度 10～3000毫米/分(无级) 主轴电机功率 7.5旺主轴转速 50～2500转/分(18挡) 加工精度±0.10毫米加工光洁度▽5 该机床所配的仿形仪为3YZF-1型(详见本刊1976年第1期),故可实现两坐标和三坐标自动轮廓仿形(三坐标联动时,爬升角小于30°),以及手动立体仿形。样机进行了试加工及小批生产,经过审查鉴定认为,该机床的设计和试制是成功的,仿 Changzheng Machine Tool Plant, Zigong City, Sichuan Province, aiming at the characteristics of aircraft structural parts, the XF5032 three-coordinate hydraulic profile milling machine was successfully designed and prototyped on the basis of X52K vertical milling. The main technical parameters are as follows: Table area 320 × 1250 mm Copy stroke 700 × 280 × 300 mm Copy feed speed 10 ~ 3000 mm / min (stepless) Spindle motor power 7.5 Wang Spindle speed 50 ~ 2500 r / min 18 block) Machining accuracy ± 0.10 mm Machining finish ▽ 5 This machine is equipped with a profiling device 3YZF-1 type (see the first issue of 1976), it can achieve two coordinates and three-coordinate automatic contouring Coordinate linkage, the angle of climb is less than 30 °), and manual three-dimensional profiling. Prototypes were tested and small batch production, after examination and identification that the design and trial production of the machine is successful, Imitation