本文介绍带自动装卸机的自动车床,在进行自动操作加工套筒之类形状端面时的工件复位确认控制装置。要装夹工件A,自动装卸机18就要将工件A放到卡盘1的前面,然后通过工件推杆7前端的工件压盘9将工件推入卡盘内。通过以上动作,工件A被推压到卡盘1内基准挡 This article describes the automatic lathe with automatic loading and unloading machines, the workpiece reset confirmation control device when the shape of the end face such as automatic processing sleeve. To load the work A, the automatic loader 18 puts the work A in front of the chuck 1 and then pushes the work into the chuck through the work platen 9 at the front end of the work pusher 7. With the above operation, the workpiece A is pushed to the reference position in the chuck 1