The design and the deposition of a rugate filter for broadband applications are discussed.The bandwidth is extended by increasing the rugate period continuously with depth.The width and the smoothness of the reflection band with the distribution of the periods are investigated.The improvement of the steepness of the stopband edges and the suppression of the side lobes in the transmission zone are realized by adding two apodized rugate structures with fixed periods at the external broadband rugate filter interfaces.The rapidly alternating deposition technology is used to fabricate a rugate filter sample.The measured transmission spectrum with a reflection bandwidth of approximately 505 nm is close to that of the designed broadband rugate filter except a transmittance peak in the stopband.Based on the analysis of the cross-sectional scanning electron microscopic image of the sample,it is found that the transmission peak is most likely to be caused by the instability of the deposition rate. The design and the deposition of a rugate filter for broadband applications are discussed. Bandwidth is extended by increasing the rugate period continuously with depth. Width and the smoothness of the reflection band with the distribution of the periods are investigated. Improvement of the steepness of the stopband edges and the suppression of the side lobes in the transmission zone are realized by adding two apodized rugate structures with fixed periods at the external broadband rugate filter interfaces.The rapid alternating deposition technology is used to fabricate a rugate filter sample. measured transmission spectrum with a reflection bandwidth of approximately 505 nm is close to that of the designed broadband rugate filter except a transmittance peak in the stopband. Based on the analysis of the cross-sectional scanning electron microscopic image of the sample, it is found that the transmission peak is most likely to be caused by the instability of the deposition rat e.