论文部分内容阅读
污泥处理塔(见照片),能将清洗车辆后的污泥水进行沉淀分离,使清水回收再用,并将污泥排放入车。污泥处理塔可兼供水泵的起动引水。污泥处理塔主要由水泥、锥池、定量斗、放泥门、主柱及液压系统等部分组成。水池上有进水管及溢流管。锥池与水池相连,下部有放水管,用以放出浮水,便于污泥排出。锥池下端为一倒锥形的定量斗,它具有消除泥土“搭桥”现象的作用,容量为两立方。定量斗的下方是法兰,其上装有两扇放泥门,可由里向
Sludge treatment towers (see photo) can sedimentate and separate the sludge water after cleaning the vehicle, allowing the clean water to be reused, and the sludge discharged into the vehicle. Sludge treatment tower can also be used to start the water pump. Sludge treatment tower is mainly composed of cement, cone pool, quantitative bucket, mud gate, main column and hydraulic system. There are inlet pipes and overflow pipes on the pool. The cone pool is connected to the pool, and the lower part has a discharge pipe to release the floating water to facilitate the sludge discharge. The lower end of the cone pool is an inverted cone-shaped hopper, which has the function of eliminating mud “bridge” phenomenon and has a capacity of two cubic meters. Below the dosing bucket is a flange, on which two silting doors are installed.