目前,工业生产中使用的疏水器,由于凝结水中含有固体杂质、维修不及时、用汽压力高、凝结水量大等原因,常常造成疏水器在生产装置中不能发挥应有的作用,使蒸汽浪费现象严重,特别是当蒸汽压力高或凝结水量大时,目前尚无合适的疏水器供其使用。“汽水分离器”是代替疏水器解决这一困难的一种较好装置。“汽水分离器”有一次投资大,技术条件要求较高的缺点。因此,它主要用于蒸汽压力高或凝结水量大,一般疏水器解决不了的地方,而不是所有的用汽设备一概使用这种“汽水分离器”。“汽水分离器”在我厂用汽设备上安装使用已经多年了,实践证明虽然它一次投资高, At present, the traps used in industrial production often cause the steam traps to not play a proper role in the production facilities due to the solid impurities contained in the condensate water, improper maintenance, high steam pressure and large amount of condensed water, so that the steam is wasted The phenomenon is serious, especially when the steam pressure is high or the amount of condensate is large, there is currently no suitable trap for its use. “Separator” is to replace the trap to solve this problem a better device. “Water separator” has a large investment, the technical requirements of the shortcomings. Therefore, it is mainly used for steam pressure is high or large amount of condensate, the general trap can not be resolved, not all of the steam equipment used in this kind of “soft water separator.” “Water separator” installed in our plant gas equipment has been used for many years, and practice has proved that although it is a high investment,