论文部分内容阅读
油雾润滑是近十几年才发展起来的一种新型润滑方式。任何一种润滑方式,实际上都不光起润滑作用,比如,稀油循环润滑就起着润滑、冷却和保护工作表面等作用。在现代化的冶金车间内,在重载、高速、高温和恶劣的工作环境里,冷却和保护工作表面尤为重要。稀油循环润滑系统耗油量很大,且需复杂的管道和带过滤器、冷却器和净油机等的大型油站;大量油的循环,又加速润滑油的失效和影响润滑质量;并且,由于油的漏损容易造成环境的污染和产品表面质量的降低。随着生产和技术的发展,对速度和产品的质量要求越来越高,与此同时,要求简化生产管理和降低产品的成本,这就引起对润滑技术的重视,从而速进润滑技术的发展。油雾润滑正是在这种条件下产生和发展起来的。
Oil mist lubrication is developed over the past decade a new type of lubrication. Any kind of lubrication, in fact, not only play a role in lubrication, for example, thin oil circulation lubrication plays a role in lubrication, cooling and protection of the work surface. In modern metallurgical plants, cooling and protecting work surfaces are particularly important in heavy duty, high speed, high temperature and harsh working conditions. The thin oil circulation lubrication system consumes a large amount of fuel and requires complex pipes and large gas stations with filters, coolers and oil purifiers; the circulation of a large amount of oil accelerates the failure of lubricating oil and affects the lubrication quality; and , Due to oil leakage easily lead to environmental pollution and reduce the surface quality of the product. With the development of production and technology, the demand for speed and product quality is getting higher and higher. At the same time, the demand for simplification of production management and reduction of the cost of products leads to the emphasis on lubrication technology and the development of rapid lubrication technology . Oil mist lubrication is produced and developed under such conditions.