VO-9800录像机是索尼公司生产的具有专业级的录像机。在长期大量的使用过程中,本人将其常见的故障及排除方法总结如下: 故障现象Ⅰ:在播出过程中,机器突然停止并出现错误指示代码E02(磁带张力异常)。出现这种情况时,应打开机器上盖,用手拨动穿带电机上的蜗杆,将磁带取出后再进行检修。 E02出现最常见的是带盘电机上皮带断开,由于不能收带,造成磁带过松。此时如按弹出键,在卸载过程中将严重损伤磁带。更换皮带后故障 VO-9800 VCR is Sony’s professional video recorder. In the long-term large-scale use, I will summarize its common failures and troubleshooting methods: Symptom Ⅰ: During the broadcast, the machine suddenly stopped and the error indication code E02 (abnormal tape tension). When this happens, you should open the machine cover, hand-wear wear the worm on the motor, remove the tape before overhauling. The most common occurrence of E02 is that the belt motor on the belt is disconnected. As the belt can not be taken up, the tape is too loose. At this point, if you press the eject button, the tape will be severely damaged during the unloading process. After replacing the belt fault