常用于机械设备静密封的、非标准规格尺寸的O形密封圈,在现场维修和室内试验时,如采用粘接方法,既可以减少模具设计制造、降低生产成本,同时亦可解决现场维修所需的急用件,使维修或试验进度加快,提高设备利用率。 对于大尺寸的O形密封圈,一般采用截面为圆形的橡胶绳粘接而成。若需要较小尺寸的 Commonly used in mechanical equipment, static seals, non-standard size O-ring, in the field of maintenance and laboratory tests, such as the use of bonding methods, both to reduce mold design and manufacturing, reduce production costs, but also can solve the on-site maintenance Urgent parts needed to speed up the maintenance or test, improve equipment utilization. For large-size O-ring, the general use of rubber cross-section of the circle made of rubber bonding. If you need a smaller size