在仿古建筑中,堆灰出字是常常用到的。这里介绍一下技术要领。首先要在预定的墙体或预制件上根据出字内容的需要,预埋好小钉(用φ4钢筋),出头不宜太长,再用20号铅丝沿着小钉扎成骨架。用水泥、石灰、沙按1:1:1组成混合料,抹在所需堆灰出字的墙面或板面的骨架上,到六成干时,用宁体或画体的纸稿 In antique buildings, ash is often used. Here are some technical tips. First of all, in the predetermined wall or prefabricated parts according to the needs of the content of the words, pre-embedded small nails (with φ4 rebar), the head should not be too long, and then use the 20th wire along the pin to form a skeleton. Mix cement, lime, and sand in a 1:1:1 mixture and apply it to the wall or board surface of the required pile of ash. When it is 60% dry, use a paper with a body or a portrait.