论文部分内容阅读
林辛格公司成立于1939年,主要生产用于造船和制管工业的专用铣床、工业锯床以及其它专用机床。其产品95％出口世界各地。在50年代,林辛格公司发展了螺纹剥落铣削技术和平板带钢快速铣削技术。平板带钢铣削技术(快速铣削和透平铣削)主要应用于焊接坡口的加工,快速铣削可加工40～100mm 厚的平板,边形铣头可使全部板边的焊接坡口一次铣削成形,进给速度比端铣提高2～10倍。透平铣削技术为林辛格专利,适用于加工0.5～30mm厚的带钢,长度不限。由于采用先进的铣削技术,焊接坡口
Lindsinger was founded in 1939, mainly for the production of shipbuilding and pipe industry dedicated milling machine, industrial sawing machine and other special machine tools. 95% of its products are exported all over the world. In the 1950s, Lindström developed thread milling technology and flat strip rapid milling technology. Flat strip steel milling technology (rapid milling and turbine milling) is mainly used in the processing of welding groove, rapid milling can be processed 40 ~ 100mm thick plate, the edge milling head can make all the plate edge welding groove milling, Feed rate increased 2 to 10 times than the end milling. Turbine milling technology for Lindsinger patent, suitable for processing 0.5 ~ 30mm thick strip, length is not limited. Thanks to the advanced milling technology, the welding groove is welded