论文部分内容阅读
污染因子在土壤中迁移机理在室内多采用土柱试验开展研究，但对于低渗透性土壤（
惰性污染因子Cl-迁移特性的离心模拟试验研究
【摘 要】
：
污染因子在土壤中迁移机理在室内多采用土柱试验开展研究，但对于低渗透性土壤（
【机 构】
：
中国水利水电科学研究院 流域水循环模拟与调控国家重点实验室
【出 处】
：
水利学报
【发表日期】
：
2004年期
其他文献
对Sn-3.5Ag-0.7Cu/Ni-P界面上的焊点进行了150℃固相老化和250℃液相回流老化实验.两种条件下焊料体内和界面处金属间化合物的成分、长大速率及形貌均有较大差异.在液相回流
为提高集装箱码头堆场场吊作业效率,研究了堆场单堆区混贝条件下的场吊调度问题.在单堆区内集装箱混贝堆放的前提下,提出了堆场场吊装卸作业时间窗约束、作业次序依赖的设备
In order to predict the local scour hole and its evaluation around a cylindrical bridge pier,the computational fluid dynamics (CFD) and theories of sediment mov
Rare earth elements (REEs) and major elements of 25 cobalt-rich crusts obtained from different depths of Mid-Pacific M seamount were analyzed using inductively
Mechanical properties and texture evolutions of the as-rolled AZ31 Mg sheets were investigated. The results show that the grains of the sheets are significantly
Traffic flow prediction is an important component for real-time traffic-adaptive signal control in urban arterial networks.By exploring available detector and s
A new type of Ni-P alloy with rod-shape was prepared by electroless deposition method based on the shape of Nocadia, a kind of bacteria. The material was charac
Porous carbon/carbon preforms were infiltrated with melted silicon to form C/C-SiC composites. Three-layer Si-Mo coating prepared by slurry painting and SiC/Si-
The underwater tapping machine is composed of a center bit,a tapping cutter,a sesl box,a main drive box,aboring bar assembly,a envelop,a gear case,a counter and
Hybrid model testing technique is widely used in verification of a deepwater floating structure and its mooring system,but the design of the truncated mooring s