国内外其它厂家的热再生机组因受设备设计和结构的限制,进场、撤场过程中需要采取一些特殊的措施,致使进场、撤场时间很长。常见的有以下几种情况。①需用平板车运输有些设备因前后轮胎都是实心胎,或结构的原因.转场时需用平板车运输。其中有的设备更因高度高,重量重.设备的接近角和离去角都很小,通过性能很差,转场运愉时需要 Due to the equipment design and structure restrictions, the heat recovery units of other domestic and foreign manufacturers require some special measures in the process of entering and leaving the market, resulting in a long time for entry and removal. Common in the following situations. ① need to use flatbed transport Some equipment because the front and rear tires are solid tires, or the structure of the reasons. Transitions need to use flatbed transport. Some of which are more due to the high height and weight of the device approach and departure angles are small, poor performance through the transfer of transport needs