1设备情况我公司Φ4.8m×72m回转窑2005年3月投产,斜度3.5%,转速0.403~4.03r/min,单边传动,齿轮模数40mm,小齿轮齿数23个,大齿圈齿数188个。2005年8月一场暴雨造成山体滑坡,将窑主电缆砸断,致使窑突然停机,且长时间无法转窑,造成窑筒体弯曲严重,距大齿圈5m处测量筒体的弯曲度在25~40mm(根据窑工况不同而不同),在运行中无法校 1 Equipment The company Φ4.8m × 72m rotary kiln put into operation in March 2005, the slope of 3.5%, speed 0.403 ~ 4.03r / min, single-sided transmission, the gear module 40mm, the number of pinion teeth 23, 188. August 2005 a heavy rain caused landslides, the kiln cable smashed, resulting in a sudden shutdown kiln, and a long time can not turn kiln, resulting in kiln cylinder bending serious, 5m from the ring gear measuring the curvature of the cylinder at 25 ~ 40mm (depending on the kiln operating conditions vary), can not be in operation