本文提出了一种吊杆力张拉值的拟合方法,经过若干次的调整使得吊杆张拉力逐渐接近设计目标值,此法根据给定吊杆力目标值和实际计算值反算的差值.反加在按照该模型吊杆所需输入的张拉值上,如此反复迭代多次直至全桥各吊杆索力实测值与目标值相吻合,线形也与设计值接近,结合工程实例此种吊杆迭代方法效果明显。 In this paper, a fitting method of the tension value of the boom force is proposed. After several adjustments, the tension force of the boom rod approaches the designed target value. Based on the difference between the target value of the boom force and the actual calculated value Inversely added in accordance with the model boom input required tension value, so repeated several times until the full bridge of each boom rod force measured value and the target value is consistent, the line is also close to the design value, combined with engineering examples This boom method is effective.