论文部分内容阅读
我厂利用2~#高炉大修的机会,在炉顶设备上增加了一个空斗旋转偏心布料器。此布料器是将一个环形底座搁在小钟料斗上,使大齿圈与小钟料斗上的空斗联接,并在空斗内加一个斜面挡板使炉料向一边偏落。布料器的传动是:电机→联轴器→藏速机→万向联轴节→伞形齿箱→小齿轮→大齿圈→漏斗。(见图)在减速机低速轴的另一侧装有小链轮,通过链条带动电气控制用小减速机,此减速机的速比与大小齿轮的速比一样,在小减速机低速轴一侧装有控制凸轮,它是控制电机停转
I use 2 # blast furnace overhaul the opportunity to increase the top of the device on the air bucket rotating eccentric distributor. The distributor is resting a ring base on a small bell hopper so that the large gear ring is connected to an empty bucket on a small bell hopper and an inclined bezel is added to the empty hopper to deflect the charge sideways. The drive of the distributor is: motor → coupling → possession of speed machine → universal coupling → bevel gear box → pinion → gear ring → funnel. (See picture) On the other side of the low speed shaft of the reducer is equipped with a small sprocket, which drives the small reducer of electrical control through the chain. The speed ratio of the reducer is the same as the speed ratio of the large and small gears, Side equipped with a control cam, it is to control the motor stall