【摘 要】
：
We propose a high temperature-sensitive long period fiber grating (LPFG) sensor fabricated by using the femtosecond laser transversal-scanning method. The femtosecond pulses scan over the whole fiber core and some part of the cladding region; the modified
【机 构】
：
StateKeyLaboratoryofHighPerformanceComplexManufacturing,CollegeofMechanicalandElectricalEngineering,
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
We propose a high temperature-sensitive long period fiber grating (LPFG) sensor fabricated by using the femtosecond laser transversal-scanning method. The femtosecond pulses scan over the whole fiber core and some part of the cladding region; the modified regions are more extended. It is found that the LPFG-I fabricated by the transversal-scanning method shows higher temperature sensitivity and better temperature uniformity than that of LPFG-II written by the femtosecond laser point-by-point method. The LPFG-I with a temperature sensitivity of 75.96 pm/°C in the range of 25°C–400°C is measured. Moreover, in the range from 400°C to 800°C, a higher temperature sensitivity of 148.64 pm/°C and good linearity of 0.99 are achieved, while the temperature sensitivity of LPFG-II is only 95.55 pm/°C. LPFG-I exhibits better temperature characteristics, which, to the best of our knowledge, has the highest sensitivity in silica fiber temperature sensors.
其他文献
本文提出一种使用立方相位光栅测量涡旋光束高阶轨道角动量（Orbital Angular Momentum， OAM）模式的方法。将艾里光束特有的相位变化特性与光栅的结构函数结合，设计一种立方相位光栅，并将涡旋光束准直入射至立方相位光栅的不同入射点上以产生衍射图。数值仿真和实验结果表明，通过分析衍射图中的类厄米-高斯衍射图样可以较容易地测量入射光束的OAM模式。入射光束拓扑荷值的大小由衍射图中的亮条纹数决定，其正负值由亮条纹的分布走向决定。优化后的实验链路可简化实验操作，效果明显，可将检测的拓扑荷值最高可达
柔性透明电极因其轻便、柔性、低成本等特点备受广大研究者的关注，在平板显示器、太阳能电池、触控面板等光电器件中具有很好的应用前景。采用光刻方法制备的银网格透明电极在可见光范围内(400～800 nm)的透射率大于90.48%、方块电阻可低至4.1 Ω/sq，且该透明电极具有很高的光导比σDC/σOP和良好的柔性，经过1000次弯曲，其方块电阻仅增加11.8%。进一步采用丝网印刷技术将金属网格应用于4 inch(1 inch=2.54 cm)柔性电阻触摸屏，验证了该透明电极在大面积的均匀性与可靠性。
We propose and investigate a compact optical fiber sensor that aims to measure the torsion in both amount and direction with high sensitivity. This sensor is configured by a triangular-prism-shaped long-period fiber grating, which is fabricated by the hig
报道了一种可实现入瞳位置不变的超广角扫频光相干层析成像(OCT)系统,对成像系统的样品臂进行了建模和光学仿真,证实其可行性和有效性。设计并展示了一个超广角OCT成像系统,在仅改变振镜位置及透镜间距的情况下,实现了超过40°的眼底单次超大角度扫描,单次横向扫描范围覆盖眼底Ⅰ区,有效增加了OCT单次扫描的成像范围。
为了提高神光II 5 PW (SGII-5 PW) 超短脉冲激光系统的运行安全性, 针对大能量光参量啁啾脉冲放大(OPCPA)光束近场分布均匀性问题, 从理论上进行了数值模拟, 并与实验数据进行了对比分析。在1 PW级放大器模拟中, 以预放大器以及神光II大能量抽运脉冲的测量数据为基础, 利用参量耦合波方程组数值模拟方法, 得到了近场填充因子与光通量对比度在光参量放大过程中的演变, 并结合转换效率与输出稳定性进行讨论, 得到了对应于高光束质量、高转换效率与高稳定性的非线性晶体长度优化范围, 结果还表明抽运
A monolithic integrated few-mode transmitter comprising of two directly modulated distributed feedback lasers and a multimode-interference-coupler-based mode converter-multiplexer with 66% mode conversion efficiency was designed and demonstrated. A fundam
Holographic imaging offers a reliable and fast method to capture the complete three-dimensional (3D) information of the scene from a single perspective. We review our recently proposed single-channel optical system for generating digital Fresnel holograms
在用双光子激发产生的Xe(5p56p)原子与N2分子碰撞过程中,有效地生成了N2(B3Пg,v=9～14)振动激发态.观察到相应的Δv=4的N2(B3Пg-A3∑u )辐射跃迁萤光,测量了Xe6p原子在N2中的淬灭速率常数,对碰撞弛豫过程进行了讨论.