诸多图集设计砌体通压筋在纵横墙交接处（无构造柱的情况下）均为分层压砌法。这样做会使砖压筋的皮数增多 ,不易控制灰缝厚度 ,致使灰缝明显加厚而影响砌体的质量 ,同时也难以检查压墙筋的根数及锚固长度。另外 ,纵横墙有时不同时砌筑而留槎 ,又给砖压筋的锚固搭接造成困难。? A lot of atlas design masonry through the pressure in the cross-wall junction (without the case of column) are layered compression method. In doing so, the number of brick stiffeners will increase, the thickness of the mortar joints will not be easily controlled, and the thicknesses of the mortar joints will be obviously increased, which will affect the quality of the masonry. At the same time, it is difficult to check the number of anchoring bars and the anchoring length. In addition, the vertical and horizontal walls are sometimes not masonry and stay 槎 at the same time, but also to anchor brick lacing difficulties. ?