粉煤灰铁粉造球工艺及入炉冶炼的初步实践

来源 :四川冶金 | 被引量 : 0次 | 上传用户:hlwerewolf
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
近年来,我厂对粉煤灰铁粉造球焙烧和在12米~3高炉上冶炼进行了生产试验。试验结果表明:粉煤灰铁粉造球及入炉冶炼在工艺技术上是可行的,经济上是有利的,效益是好的;成球混合料中燃料配比是影响球团矿高温强度的关键;80%的铁粉配用20%的生石灰粉可生产出碱度1.0左右的半自熔性球团矿;粉煤灰铁粉球团矿炼铁与铁矿石炼铁比较,前者具有炉况顺,冶强高,产量上升、焦比下降,接受大风、高温,有利于高炉强化冶炼操作等优点。为此,建议有条件的铁厂可试验生产。在如何改进粉煤灰铁粉磁选工艺,提高铁粉品位;如何进一步提高球团矿高温强度,以期适应较大高炉的冶炼要求等问题尚须进一步探讨。 In recent years, I plant on the fly ash ball making roasting and smelting in the 12 m ~ 3 blast furnace production test. The test results show that it is feasible and economical to make the ball and the smelting of the fly ash iron powder in the process technology, and the benefit is good. The ratio of the fuel in the ball mixing mixture is the high temperature strength affecting the pellet The key; 80% of the iron powder with 20% of the quicklime can produce a basicity of about 1.0 semi-self-fluxing pellets; fly ash iron pellets and iron ore ironmaking ironmaking compared with the former has Furnace condition, rule high, production increased, coke down, to accept the wind, heat, is conducive to strengthening the blast furnace smelting operation and so on. To this end, the proposed iron mills can test the production. How to improve the magnetic separation technology of fly ash iron powder to improve the quality of iron powder; how to further improve the high temperature strength of pellets in order to adapt to the requirements of smelting larger blast furnace need to be further explored.
其他文献
本文就烧结气氛、烧结温度、添加元素以及铬粉粒度等因素对Cr-Cu两相合金的烧结影响进行了研究。结果表明:在烧结密度和脱氮上,真空烧结优于纯氢烧结,但高温真空烧结时存在较
在回顾鼓风炉炼锌主要成就的基础上,分析了其优点,展望了未来。 On the basis of reviewing the main achievements of blast furnace zinc smelting, the advantages are a
混合料层的初始透气性对烧结过程的气体动力学有着重要的影响,因而对烧结设备的生产率也有重要的影响。在文献中,作为比较各厂混合料透气性的通用指标和评价烧结前炉料准备
我们自1996年8月至1998年10月用钕铁硼永磁体贴敷治疗血管瘤64例,现将观察结果报道如下.
工业试验使用平炉冶炼的16Mn钢水,钢包喷吹CaSi粉或CaO+CaF_2粉剂。喷吹CaSi粉后钢中电解夹杂含量显著降低,钢中夹杂物明显细化。促使钢中夹杂物变性重要的是控制钢中Ca,Al,S
本文以宝钢450米~2烧结机为例,详细介绍了烧结机各部位(包括烧结机机架、移动式尾端、烧结机台车,风箱及抽风管道等)热膨胀的处理方法,并提供了大量有参考价值的数据。 Taki
为了促进我国有色冶金企业的节能工作,笔者在查阅文献的基础上,较深入地研究了国内外冶金能源的可比性,并从中归结出铜、铅、锌冶金能耗的国际先进水平和一般水平,以供我国有