某一油码头建造已有20年了,码头损坏严重,码头前沿橡胶护弦已基本脱落,施工方案要在原横梁上打一排50mm深,直径45mm的洞孔,孔内浇注环氧砂浆,预埋φ36×45螺栓,然后再按上新的橡胶护弦,因洞孔半数以上处在水位变动区,如用乙二胺配制的环氧砂浆,根本无法施工。我们采用SF环氧树脂固化剂,操作简单,使用效果好,解决了现场潮湿环境施工的困难。 An oil terminal has been built for 20 years, the terminal is seriously damaged, and the front rubber fender of the terminal has basically come off. The construction scheme requires that a row of 50mm deep holes with a diameter of 45mm be drilled in the original beams, epoxy mortar should be poured in the holes, Buried φ36 × 45 bolts, and then press the new rubber band, due to more than half of the hole in the water level change area, such as epoxy mortar formulated with ethylenediamine, simply can not be constructed. We use SF epoxy curing agent, simple operation, good effect, to solve the construction site wet environment difficult.