【摘 要】
：
In the present work investigations have been made to see the role of metal oxides on the performance of the silver metal oxides electrical contact materials. Si
【机 构】
：
School of Physics and Material Science,Materials Science and Technology Division
论文部分内容阅读
In the present work investigations have been made to see the role of metal oxides on the performance of the silver metal oxides electrical contact materials. Silver metal oxide materials of three different compositions Ag-10CdO, Ag7.6SnO2-2.3In2O3 and Ag-10ZnO were prepared by internal oxidation process under identical processing conditions.These materials were tested for electrical conductivity, hardness, and erosion loss. Performing an accelerated test on the actual contactor assessed the electrical performance, involving erosion loss and temperature rise of the processed materials. The arc-eroded surface was characterized under scanning electron microscope. The study of the eroded surfaces of contacts indicates that the thermal stability of metal oxides depends on nature of silver-metal oxide interface and their mode of erosion. An attempt is made to correlate the surface features of the eroded contacts with the thermal stability of metal oxides.
其他文献
The ZrO2-CeO2-Al2O3 system has been assessed with the CALPHAD (Calculation of Phase Diagrams) technique using the PARROT procedure. The experimental information
Semi-solid AZ91D magnesium alloy was investigated in isothermal steady-state condition. The influence of stirring technological parameters such as stirring temp
The hydration and pore structure of sulphoaluminate MDF cement were studied by X-ray diffractometer ( XRD ), scanning electron microscope (SEM) and mercury intr
Glass forming ability (GFA) and structural characterization of a new amorphous Al-Ni-Sr alloy melt spun were investigated on the theory of the factors for the g
The low temperature ion sulphuration-an effective surface engineering technique for reducing friction and wear of rubbing-pairs was introduced. It involves the
CO2 laser quick assembly technology is adopted on the surface of cast aluminum ZL104 to form a dense ceramic coating containing a great deal of nanometer Al2O3/
Low-Co AB5-type Mm(NiCoMnA1)5Bx (x = 0, 0.1, 0.2 ) electrode alloys were prepared by casting and rapid quenching.The effects of the rapid quenching on the latti
A new concept of salt core, a melting temperature of which is lower than the solidus temperature of cast alloy,was introduced to produce an integrated casting p
In order to improve the in-flight characteristics of the atomizing droplets during high velocity wire arc spraying (HVAS), some changes have been operated on th
The content of zirconia has a remarkable influerce on transformation behavior and mechanical properties of Al2O3/ZrO2 (2Y) composites. When 15% and 20% ZrO2(2Y)