拆装轴瓦更换S195和S1100型柴油机的主轴瓦和连杆轴瓦时,可采用以下简便方法。这个方法的特点是不必拆卸气缸盖和活塞连杆组,不必重调气门间隙。 (1)先试一试曲轴是否能转动。如果曲轴转不动,可先卸下飞轮上的传动带轮,撬下止退垫圈锁片,用随机配带的专用飞轮螺母拆装扳手卡住飞轮螺母,两用手锤顺时针使劲敲击扳手,曲轴便能转动。 (2)拆下齿轮室盖、齿轮和后盖,拧松飞轮螺母, Removal and replacement of bushings S195 and S1100 diesel engine main bearing and connecting rod bearing bush, you can use the following simple method. The characteristic of this method is that it is not necessary to disassemble the cylinder head and the piston rod set, and it is unnecessary to re-adjust the valve clearance. (1) First try whether the crankshaft can rotate. If the crankshaft does not move, remove the drive pulley on the flywheel, pry the washer lock washer, use the special flywheel nut that comes with it to disassemble the flywheel nut, and hit the wrench , Crankshaft can rotate. (2) Remove the gear chamber cover, gear and back cover, unscrew the flywheel nut,