【摘 要】
：
The goal of this study is to investigate the effect of key design parameters on the thermal performance of the packed bed heat storage device by numerical calcu
【机 构】
：
School of Energy and Power Engineering, Northeast Electric Power University, Jilin 132012, China
论文部分内容阅读
The goal of this study is to investigate the effect of key design parameters on the thermal performance of the packed bed heat storage device by numerical calculation. A one-dimensional, non-equilibrium packed bed latent heat storage mathematical model was established and the applicability of the model was verified. The results demonstrate that the inlet temperature of the heat transfer fluid (HTF) had the greatest influence on each index. When the inlet temperature increased from 333 K to 363 K, exergy destruction increased threefold, effective heat storage time decreased by 67％, effective heat storage increased by 38％, and exergy efficiency decreased by 11％. The decrease of the capsule diameter had a positive effect on each evaluation index. According to the sensitivity analysis, the order of importance of each parameter within their variation range was HTF inlet temperature, HTF flow rate, PCM capsule size and PCM initial temperature.
其他文献
To improve the prediction accuracy of heating demand, an appropriate base temperature should be estimated before using the heating degree-days (HDD) approach. T
A major roadblock in achieving substantial building energy reduction is the low performance of old buildings that account for a significant portion of the build
Ceiling fans are used all over the world as a mean of enhancing indoor thermal comfort. A number of grading programs have been initiated for assessing energy pe
Architects welcome double skin facade (DSF) due to its aesthetic quality. The first DSF structure was intended to prevent cold weather and strong winds. Nowaday
The indoor parameters are generally non-uniform distributed. Consequently, it is important to study the space cooling/heating load oriented to local requirement
Evidence indicates that improvement of thermal performance of building envelope has the potential for aggravating the indoor overheating risk in summer. On the
A computational research of radiative-convective energy transport in large-scale enclosure with a heat-generating heater under normal room conditions has been c
Particulate matter emission from rotating wheels, which imparts a force to the contact surface and causes strong air currents, is one of the important pollutant
随着节能标准的不断提升,节能造价成本也随之增多;设计人员对建筑节能知识、相关标准理解不到位,设计时保守意识较为严重,对节能新技术新产品不够了解,造价成本不够熟悉,造成节能方案成本偏高的情况。文章通过对节能造价成本与相关节能设计标准及规范的解读,分析节能优化设计的原则,总结概括了节能优化设计管控措施,形成设计优化策略,以期对EPC项目设计阶段成本控制具有一定的指导意义。
A temperature-based method is usually applied in displacement ventilation (DV) design when overheating is the primary indoor climate concern. Different steady-s