论文部分内容阅读
1.应用范围和领域1.1 本国际标准适用于供剪切成单张薄板用的、公称宽度为500—1000毫米(包括1000毫米)、公称厚度为0.15—0.49毫米(包括0.49毫米)的卷状冷轧镀锡板和卷状冷轧原板。1.2 镀锡卷板和原卷板的卷宽和厚度不在1.1节规定范围的供货,由供需双方协定。注:在采用某既定厚度的钢坯时,卷板的最大宽度取决于制造条件。1.3 本国际标准不适用于成张镀锡板和原板,也不适用于商业上通称为镀锡钢带或镀
1. Scope of application and area 1.1 This International Standard applies to rolls intended for shearing into sheets with a nominal width of 500-1000 mm (including 1000 mm) and a nominal thickness of 0.15-0.49 mm (including 0.49 mm) Cold-rolled tin plate and rolled cold-rolled original plate. 1.2 The thickness and thickness of the coil and the original coil are not agreed in the range specified in Section 1.1, as agreed between the supplier and the purchaser. Note: The maximum width of a coil depends on the manufacturing conditions when using a billet of a given thickness. 1.3 This International Standard does not apply to sheets of tin plate and the original board, nor is it suitable for commercial commonly known as tinned strip or plating