The stress corrosion cracking(SCC)behaviors of 2A12 aluminum alloy after annealing treatment were studied by slow strain......

With an alloy content as high as 80%or more,Ni-based OCTG is a strategic products related to the state energy security,m......

Two potential novel environmentally friendly ashless vegetable oil additives,2-mercaptobenzothiazole derivatives,di-n-do......

In present study, the effect of the solvent annealing temperature on the crystal modifications and the phase transition ......

To study the applicability of the basalt fiber through various experimental works in thermal and chemical environments, ......

Fluororesin-based anti-corrosive coatings including graded FEP/PPS were prepared on carbon steel by melt powder coat- in......

Steady-state corrosion and wear behaviors of two Al-bronzes,Cu-14Al-X and QAl9-4,in 5.0% H2SO4 solution were investigate......

Traditionally,austenitic stainless steels 304 and 316 have been employed in coastal regions as roofing materials unfortu......

The corrosive behaviors of hot-dip galvanized steel (GI) sheets and the corresponding interstitial free (IF) steel base ......

In this paper, the failure mechanism of electronic equipment was analysed. Aiming at the limitation of traditional maint......

The corrosive rates of 4 types of metals as well as epoxy-coated metal in a variety of preservatives derived from differ......

In order to promote the light output powers of GaN-based light emitting diodes (LEDs), two kinds of novel corrosive liqu......

讨论、分析了混凝土中钢筋在腐蚀性环境中的腐蚀问题。钢筋主要受环境中渗透的腐蚀性物质侵蚀 ,腐蚀开始于氯化物的渗入及钝化的破......

The corrosion behavior of ZL104 alloy at different states (as-cast and heat treatment) in salt spray corrosion (SSC) was......

After removing tin coating of tinplates offered by some steel works, we discovered massive, highly disperse gray points......

Galvanic, compatibility between graphite epoxy composite materials (GECM) and LY12CZ aluminum alloy was evaluated in di......

By means of ~(29)Si and ~(27)Al magic angle spinning nuclear magnetic resonance(MAS NMR) combined with deconvolution tec......

In the hostile and highly corrosive marine environment,advanced composite materials can be used in marine current turbin......

By a simulated rainfall and runoff scouring test with typical corrosive soils in main water erosion regions of China,the......

The parameter of filling expanding ratio n, plasticity factor k1 and deformation parameter k 2 is raised, and then the e......

In order to study the compressive property of corroded concrete,accelerated corrosion test were performed on concrete C3......

The prism specimens of corroded concrete were subjected to uniaxial compressive load to develop the stress-strain model.......

The tribological properties of ZrO2 ceramic and 1Cr18Ni9Ti stainless steel rubbing pairs were investigated using a speci......

In some adjusting mechanism,solid self-lubricating material that has hot-resistant and corrosion-resistant is need for a......

By the use of polarized light microscopy, chemical etching and scanning electron micro-scopy, the erystalline morpholog......

The mechanism of tarnish caused by exposure to light and Na₂S solution treatment on silver-electroplated depo......

Select group of patients with concurrent esophagealand gastric stricturing secondary to corrosive intake requires coloni......

In this study,SiO_x films were deposited by a dielectric barrier discharge(DBD)plasma gun at an atmospheric pressure.Th......

HOT-DIPPING Zn+5% Al + (0.01%-0.2%) RE alloy on steel surface by the gas reductionmethod is a new technology. Owing to ......

This paper reports the study on the polymer protected catalyst CPVC-FeCl3 used in esterification, transesterification, ......

在微波辐射下 ,研究了一系列的酚与乙酸酐的酰化反应 ,收率为 75 %～ 99% .此方法操作简便、反应收率高、时间短 (10～ 180s) ,是合成......

The inhibition effects of sodium vanadate along with inorganic coolant inhibitors were examined on corrosion of AZ91D i......

The corrosion process of the X70 pipeline steel in 3.0wt% NaCl solution were studied using polarization method, and the ......

Careful grinding or honing is usually required in machining of gears in order to improvethe machining quality of gear s......

The corrosion resistance of the Cu-Zn-Al shape memory alloy passivated by benzotriazole was investigated bysalt spraying......

The influences of trace alloying elements niobium, vanadium and zirconium on the corrosive resistance of 18-8 type cast ......

The corrosion behavior and anti-corrosion mechanism of the Zn-Ni-Al2O3 composite coating were investigated by SEM, EDS a......

Nickel and chromium coatings were produced using plasma spraying and laser remelting on the copper sheet. The corrosion ......

An experiment is conducted to investigate the effects of lubricant10#, which contains extreme pressure additives T304 an......

The corrosion behavior of Cu-Cr alloy in 3.5%NaCl+NH3 solution had been studied, and the influences of the concentration......

Fatigue damage increases with the applied loading cycles in a cumulative manner and the material deteriorates with the c......

The corrosion properties of AZ31 magnesium alloys were studied by potentiodynamic polarization curves and electrochemica......

Due to the highly sensitive electrochemiluminescence (ECL), tris(2,2′-bipyridyl) ruthenium(II) (Ru(bpy)32+) is often us......

Thermochemical sulfate reduction(TSR)causes increasing of sulfur content in the oils,reduction of oil quality,and produc......

In order to investigate the anticorrosion performance of the organic coating/metal system, electrochemical impedance spe......

The fatigue crack propagation behavior of the LY12CZ aluminum alloy fastener involving a central hole in air or in 3.5wt......

Galvanic corrosion behavior of Ti-1023 titanium alloy coupled 30CrMnSiA steel was investigated in 3.5% NaCl solution. Pa......

Corrosion behavior of AZ91 magnesium alloy in simulating acid rain under wet-dry cyclic condition was investigated.The r......

In the present study,the passive film formed on the G3 nickel-base alloy tubing under corrosive conditions including H_2......

TiNi alloy has a high resistance to wear and could be an excellent candidate for various tribological applications. But ......