【摘 要】
：
The measurement method of warm/cool feeling which named KES-F7 Thermo Labo Ⅱ has been only developed at KES Kato Tech., Co., Ltd.in Japan.The warm/cool feeling called Qmax was evaluated from the therm
【机 构】
：
Department of Fiber and Composite Materials,Feng Chia University,Taichung,Taiwang
论文部分内容阅读
The measurement method of warm/cool feeling which named KES-F7 Thermo Labo Ⅱ has been only developed at KES Kato Tech., Co., Ltd.in Japan.The warm/cool feeling called Qmax was evaluated from the thermal conductivity and heat keeping properties rapidly.A thermal absorption and exothermic automatic measuring system (TAEAMS) was proposed in this paper.The sampling fabrics were irradiated under the 500 watt of halogen lamp with a distance of 100cm, and the irradiation angle of 450, after 10, 30minutes irradiation, turn off the 500 watt of halogen lamp, then the thermal images were captured by thermal camera and analyze the surface temperature of the fabric.
其他文献
Inorganic dominated silica/PI hybrid film has been developed successfully for the fabrication of flexible AM-OLED.The new developed highly inorganic silica containing Polyimide(PI)-hybrid exhibited ve
Hybrid (glass/carbon) fiber reinforced epoxy composites have been manufactured by the pultrusion processes.This was in order to obtain the best physical, mechanical and thermal properties and the opti
This paper focuses on the processing that aims to prepare a refined pitch with a low QI fraction and high β-resin fraction.In addition, as a precusor for formation of bulk mesophase, the primary QI pa
Tensile behavior along Z-direction in 3D pitch-based carbon/carbon composites was investigated.The preform was of cylindrical weaved construction with rods both in Z and R directions and yams in θ dir
Manufacturing process of continuous fiber reinforced thermoplastics was newly developed using multi-layered hybrid roving as a target for automotive applications.Consolidation quality and correspondin
The effects of rheological properties on the electrospun fiber structure of polyvinyl alcohol (PVA) with ultra high molecular weight (UHMW) and high hydrolysis degree have been studied in this article
Self-healing technique, utilizing thin walled microcapsules contained with a healing agent, was introduced to repair the damage in fiber reinforced composites.The wall materials of microcapsules are m
A recycle corrugated board has been filled with epoxy resin to form a core material for sandwich composite.The carbon and glass plain fabrics have been used as reinforced materials for the skin materi
The vacuum assisted resin transfer molding (VARTM) process is well known to be a low cost composites process technique.The cycle time can be shortened by using distributed layer.Distributed layer let
Composite materials have the characteristics of tailored stiffness and high specific strength.We can utilize these characteristics for developing a bow-type landing gear by composite materials.The ben