大承载无冲击复合材料释放装置的设计和分析

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户：cxc7783

【摘要】

：

本文研制了一种大承载无冲击复合材料释放装置，该装置由形状记忆聚合物复合材料制作而成，减少了释放时对空间展开结构的冲击，增加了释放的安全性和可控性。该装置由内套筒、外套筒和分离驱动装置三部分组成。内外套筒带有法兰接口，通过纤维缠绕工艺制成，可实现与其他多种装置的配合连接。通过压缩内外套筒公共部位产生凹槽，将内外套筒紧密结合。凹槽的个数和深度可控，可实现不同承载的要求。

【作者】

：

魏汉青叶耀坤刘立武张志春冷劲松

【机构】

：

复合材料与结构研究所,哈尔滨工业大学,哈尔滨,150080,中国北京空间飞行器总体设计部,中国航

【出处】

：

第二届中国国际复合材料科技大会 (CCCM-2)

【发表日期】

：

2015年7期

【关键词】

：

复合材料释放装置形状记忆聚合物大承载

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

其他文献

增强相对二硼化锆陶瓷基复合材料性能的影响

ZrB2具有优良的物理特性和化学稳定性而应用于许多领域，为了改善ZrB2难以烧结致密化和高温易氧化，本文通过共沉淀法制备包覆式Al203-Y203/ZrB2复合粉体，并对其进行放电等离子烧结制备ZrB2陶瓷基复合材料，研究增强相对ZrB2陶瓷基复合材料性能的影响。通过研究表明：两种包覆型粉体在700～1000℃时出现一次大的收缩，然后出现一个不收缩的平台阶段，两种包覆型粉体当温度达到1000～16

会议

超高温材料ZrB2增强相复合材料放电等离子烧结

Synthesis and properties of a precursor derived nanoZr(C, N)-carbon compositecoating on the SiC fibe

A precursor was synthesized through the reaction of Cp2ZrC12 and Ph2(NH3)2 and the pyrolyzed ceramics were characterized.The obtained precursor has a backbone with Zr-N-Ph unit and a relatively good s

会议

Precursor derived ceramicsnano particlesZr(CN) ceramicscoatingoxidation beh

In Situ Grown Carbon Nanotubes Reinforced SiC/SiC Composite:Fabrication and Characterization

Ni catalyst nanoparticles were deposited on SiC fiber surfaces inside three dimensional SiC fiber fabrics using four methods: vacuum impregnation, homogeneous precipitation, electrodeposition and auto

会议

catalystchemical vapor depositionpolymer impregnation and pyrolysis

Formation of abrasive superhard composite materials based on diamond and cubic boron nitride structu

The results of work on the development of abrasive superhard composite materials based on diamond and cubic boron nitride due to structuring the powder material by carbon binder at subatmospheric pres

会议

diamondcubic boron nitridecarbon binderabrasive superhard composite materials

Identification of Isolated rhombohedral crystallites in graphite blocks and study of itsformation me

The rhombohedral structure of graphite was widely considered as a mosaic distribution in a hexagonal host and was probably produced only by mechanical shear or milling.In this presentation, graphite b

会议

Organized Intrafibrillar Mineralization, Directed Bya Rationally Designed Multi-functional Protein

Taking lessons from the structure-forming process of biominerals in animals and plants, one can findtremendous inspirations and ideas for developing advanced synthesis techniques, which is called bio-

会议

intrafibrillar mineralizationmulti-functional proteinbio-process inspired synt

弹靶作用过程中陶瓷基复合材料的表面驻留行为

为提高陶瓷基复合材料在轻质装甲结构设计中应用的可行性，研究陶瓷基复合材料在抵抗弹体撞击时的表面驻留性能，进而探索其抗弹性能，旨在丰富和完善陶瓷基复合装甲材料的抗弹机理。采用数模模拟方法对弹体撞击SiC-Al陶瓷基复合材料表面驻留过程开展了深入研究，探索了复合材料的表面驻留行为，对比分析了复合材料和陶瓷材料表面驻留过程中应力水平和损伤演化过程。

会议

表面驻留陶瓷基复合材料损伤演化耗能完全损伤强度

Effect of fiber volume fraction on C / C-SiC composite mechanical properties fabricated by gaseous s

The 3-D needled C/C preforms with different fiber volume fraction, by chemical vapor infiltration (CVI) densified to obtain a density of 1.0 ~ 1.1g / cm3, were used to fabricate C/C-SiC composites by

会议

C/C-SiC compositesgaseous silicon infiltrationC/C preform3-Dneedled

The effects of PIP-SiC interphase on the mechanical properties of 3D-Cf/SiC composites prepared by G

The interphase play a role effect on the mechanical properties of composites.Especially for the Cf/SiC composites prepared by GSI process, the ideal interphase should not only prevent carbon fiber fro

会议

PIP SiCInterphaseGSICf/SiC composites

Influence of Reinforced Phase on Properties of ZrB2 Ceramic matrix Composite

Because ZrB2 has some excellent physical performance and chemical stability, it has been widely applied in a lot of fields, To make ZrB2 ceramics possess the high relative density andthe better oxidat

会议

ultral high-temperatureZrB2reinforced phaseceramic matrixcompositespark plas

大承载无冲击复合材料释放装置的设计和分析

与本文相关的学术论文