【摘 要】
：
Nano-particle reinforced nickel matrix composite coating,n-Al2O3/Ni,is prepared by manual-brushplating and auto-brushplating technologies.Structure and friction wear property of the two kinds of coati
【机 构】
：
National Key Laboratory for Remanufacturing,Academy for Armored Forces Engineering,Beijing,China,100
【出 处】
：
Fifth International Conference on Surface Engineering(第五届表面工
论文部分内容阅读
Nano-particle reinforced nickel matrix composite coating,n-Al2O3/Ni,is prepared by manual-brushplating and auto-brushplating technologies.Structure and friction wear property of the two kinds of coating were researched.For the auto-coating,the surface is smooth and neat,and made up of large quantity spheroid grains.There are few lacunae among the grains.The observed auto-coatings structure is denser,only few holes and cracks appear,the sandwich is obvious and trend to connect to a whole.Compared with the auto-coating,the manual-coatings surface is coarser and more accidented,the grains which forms the surface are not spheroid but anomalistic and similar to cauliflower,the lacunae among the grains are ubiquitous.The structure of manual-coating is sparser than the auto-coatings,there are a small quantity of holes and cracks in the section,one or two cracks extend deep into the coating.
其他文献
The nanostructured surface layers were fabricated on a thermal refining chrome-silicon alloy steel and a hypoeutectoid medium carbon steel by mean of Supersonic Fine Particles Bombarding (SFPB) based
Polishing the inner surface of slender pipe is very difficult,especially for the curve pipe.Because a usual tool do not into the inner of the surface of a curve pipe,and making to automation do not ac
In this paper,a 3D finite element model is established to simulate the ultrasonic shot peening process by using a finite element software ABAQUS.The residual stress distribution of the AISI 304 stainl
The surface roughness and surface integrity resulting from net-shape processing may be detrimental to the fatigue-life and cerrosion resistance of engineering components.The most common methods enroll
Quite recently,with development of the nano-technology,nano-particles of metal,metal oxides and non-metal have been used in industrial application as additives in lubricating oils.In this condition,a
Friction behaviors of the diamond-like carbon (DLC) film sliding against Si3N4 ball were investigated on a ball-on-disk tester in different atmospheres.The worn surface morphologies of the DLC films w
Consumable-rod Friction surfacing (CFS) is an advanced surface modification method,so it is of great importance to study figuration mechanism of surfacing layer in friction surfacing process for contr
In order to improve resisting performance of heat,wear and erosion as well as anti-thermal fatigue,build-up welding materials of brake-disc for drilling rig with better performance is developed,and it
The effects of structure on the wear and corrosion behaviors of nanocrystalline (nc) and amorphous (ac) chromium coatings prepared by electrodepositing from trivalent chromium bath and sequent anneali
Plasma sprayed coating has good corrosion resistance,heat resistance and abrasion resistance,and it has been widely used as protective layer of machine parts and pressure-containing components.Technic